• SPECvirt_sc®2013, or
• SPECvirt_sc®2013_PPW, or
• SPECvirt_sc®2013_ServerPPW

• SPECvirt_sc®2013, or
• SPECvirt_sc®2013_PPW, or
• SPECvirt_sc®2013_ServerPPW

The required metric must be listed in close proximity to any other measured data from the disclosure or any derived value.

In addition to the `requirements`_ that results not be compared to other benchmarks:

1. The SPEC VIRT_SC 2013 benchmark supports three categories of results listed below. Cross category comparisons are disallowed, however a licensee has the option of submitting results from the same test run to multiple categories.
   • Performance-only, which produces the SPECvirt_sc®2013 metric,
   • Performance/Power of the Total System Under Test, which produces the SPECvirt_sc®2013_PPW metric, and
   • Performance/Power of the Server only, which produces the SPECvirt_sc®2013_ServerPPW metric
2. The SPEC VIRT_SC 2013 benchmark uses modified versions of SPECweb 2005, SPECjAppServer 2004, SPECmail 2008 and CINT2006 for its virtualized workloads, as these are established industry-standard workloads. These workloads have been modified to focus on stressing particular aspects of the SUT's resources (CPU, memory, network, disk) typical of server consolidation environments. As such, the modifications are significant enough that comparisons between the original benchmarks and the versions used in the SPEC VIRT_SC 2013 benchmark are not allowed.

The SPEC VIRT_SC® 2010 benchmark was retired on February 26, 2014 in favor of its successor, the SPEC VIRT_SC® 2013 benchmark.

• All public use of results for this benchmark must plainly disclose that the benchmark has been retired, as described above.
• No further submissions will be accepted for publication at www.spec.org
• SPEC is no longer reviewing results for this benchmark.
• Independent publication of new results is not allowed (because the benchmark results required review by SPEC before publication)

• SPECvirt_sc®2010, or
• SPECvirt_sc®2010_PPW, or
• SPECvirt_sc®2010_ServerPPW

• SPECvirt_sc®2010, or
• SPECvirt_sc®2010_PPW, or
• SPECvirt_sc®2010_ServerPPW

The required metric must be listed in close proximity to any other measured data from the disclosure or any derived value.

In addition to the `requirements`_ that results not be compared to other benchmarks:

1. The SPEC VIRT_SC 2010 benchmark supports three categories of results listed below. Cross category comparisons are disallowed, however a licensee has the option of submitting results from the same test run to multiple categories.
   • Performance-only, which produces the SPECvirt_sc®2010 metric,
   • Performance/Power of the Total System Under Test, which produces the SPECvirt_sc®2010_PPW metric, and
   • Performance/Power of the Server only, which produces the SPECvirt_sc®2010_ServerPPW metric

2. The SPEC VIRT_SC 2010 benchmark uses modified

   versions of the SPECweb 2005, SPECjAppServer 2004, and SPECmail 2008 benchmarks for its virtualized workloads, as these are established industry-standard workloads. These workloads have been modified to focus on stressing particular aspects of the SUT's resources (CPU, memory, network, disk) typical of server consolidation environments. As such, the modifications are significant enough that comparisons between the original benchmarks and the versions used in the SPEC VIRT_SC 2010 benchmark are not allowed.